Gefen 4K Ultra HD HDMI over IP - Receiver Package EXT-UHDKA-LANS-RX

Description

Condition:
Brand new. Never used. Box was opened but product wasn't needed, so it was never used.
Description:
Gefen 4K Ultra HD HDMI over IP - Receiver Package - EXT-UHDKA-LANS-RX
Extend and Distribute 4K HDMI w/ HDR, USB, RS-232, IR, and 2-way audio over a Local Area Network
Gefen’s AV over IP solutions continue our tradition of providing high performance, scalable, expandable, and secure AV routing and distribution over a standard Gigabit Local Area Network. Our Gen 2.0 KVM products offer enhanced performance, features, and functionality such as 4K Ultra HD with HDR support, built-in scalers, video-wall control, independent USB, RS-232, IR, and audio routing**, and backward-compatibility with our first generation products. Each Sender and Receiver extends and routes video, USB, 2-way audio, RS-232, and IR.
The EXT-UHDKA-LANS-TX & RX feature maximum input resolution of 4K 60 Hz 4:2:0, and maximum output resolution of 4K 30 Hz 4:4:4. HDCP 2.2 and 1.4 are also supported. 7.1 channels of HBR (High Bit Rate) lossless and LPCM digital audio can pass through the system as well.
The Sender unit features a video output for local monitoring of the source. USB, RS-232 2-way IR, and audio can be routed independently** between any Sender and Receiver unit, allowing end-users to control any of the sources and the displays within their network. With this greatly expanded array of new cutting-edge features and performance, the new Gefen AV over IP products fully address the ever-growing needs of systems integrators.
The Receiver features a built-in scaler to help optimize the image for a variety of displays and different viewing environments. It also includes a powerful video wall controller that accommodates any screen configuration up to 16x16 and provides great flexibility in sizing and manipulating live and signage content in demanding installations. Digital and analog audio break-out de-embeds audio from the video and sends it to a separate audio system, enhancing the impact of presentations. The Receiver’s integrated USB hub with two USB 2.0 and two USB 1.1 ports accommodates touch panels, keyboard and mouse, and a variety of supported devices. This feature, along with analog audio inputs and outputs, make these products perfect to use in collaborative and interactive installations. To ensure maximum versatility and compatibility, the audio outputs on the Receiver units are compatible with both headphones and line level devices such as powered speakers.
The new KM Emulation feature facilitates real-time, simultaneous Keyboard and Mouse control of each source from all connected workstations, eliminating the inherent limitations of earlier systems. Power-over-Ethernet allows the Sender and Receiver units to be powered through a standard PoE-enabled IP network switch, without the need for external power supplies. When used in conjunction with the EXT-CU-LAN Matrix Controller, system configuration is automated and quick. Its Mass-Firmware-Update feature keeps firmware for the entire system up-to-date without the need to access and upgrade each unit separately. Enhanced network security by separating the control and AV networks is also made possible with the EXT-CU-LAN. Other control options include front panel buttons, web server interface, Telnet, UDP, and the Gefen Keyboard Switching Controller software (available for download at www.gefen.com). Gefen’s Enhanced API provides added functionality and facilitates use with third party controllers. The Gefen Gen 2.0 AV over IP products have been specifically designed for use with the Gefen Syner-G™ software, available for download at www.gefen.com. The Gefen Syner-G™ Discovery and Show-Me features greatly simplify initial IP configuration. Each cable run from a Sender to a Receiver or from a Sender or Receiver to the network switch can be up to 100 meters (330 feet).
A built-in 2-port Gigabit switch on the Receiver allows daisy-chaining of additional Receivers or other IP-enabled devices. In applications such as digital signage, where there is a need to replicate content on multiple displays, the ability to cascade Receivers removes the requirement for each cable to be run directly to the main network switch, thereby extending the range of these units far beyond the limits of a point-to-point video distribution system. The Sender and Receiver can be used as KVM extenders in a one-to-one system, or as nodes in a virtual matrix environment where any source can be routed to any or all displays, supporting up to 39,900 Senders and a combination of over 65,000 units. Applications include high performance AV and signage systems in sports bars, clubs, restaurants, board and huddle rooms, command and control centers, museums, airports, classrooms, auditoriums, hotels, and retail establishments. The Sender features a 1U tall and half-rack-width enclosure, perfect for rack-mounting using the Gefen EXT-RACK-1U-GRY rack tray (available separately). It can also be surface-mounted or be placed on a shelf. The low-profile Receiver unit is also rack-mountable using the rack tray, and it can be surface-mounted or placed on a shelf.  When used with a Gefen EXT-RMT-EXTIRN IR Extender module, it can be hidden away behind a display or inside the equipment closet.
Features:
Gefen EXT-UHDKA-LANS-RX  Features at a Glance
Extends HDMI, USB, RS-232, 2-way analog audio, and IR, using a Gigabit Local Area Network
Independent video, USB, RS-232, IR, and audio routing**
Backward-compatible with first generation Gefen AV over IP products
Supports input resolutions up to 4K 60Hz 4:2:0
Supports output resolutions up to 4K 30Hz 4:4:4
Supported HDMI Features:
HDR
HDCP 2.2 and 1.4
Deep Color
Lip-Sync
Uncompressed LPCM digital audio up to 7.1 channels
Up to 7.1 channels of HBR (High Bit Rate) digital audio including Dolby Atmos®, Dolby® TrueHD, DTS:X™, and DTS-HD Master Audio™
When used with Gefen DVI-to-HDMI cables (not included), supports the use of DVI sources and DVI displays up to 1080p Full HD and 1920x1200 (WUXGA)
Video output on Sender unit for local monitoring of the source
KM Emulation feature facilitates real-time, simultaneous Keyboard and Mouse control of each source from all connected workstations
Integrated scaler ensures maximum compatibility and best possible viewing experience with different contents and displays
Built-in video wall controller accommodates any number of rows and columns up to 16x16
Built-in Audio De-Embedder on Receiver breaks out 2 channel analog, 2 channel PCM, and up to 5.1 channels of Bitstream audio from the HDMI signal, allowing the audio content to be sent to external amplifiers and music distribution systems for added impact
Mass-Firmware-Update, quick and automated configuration, and enhanced control capabilities and system security when used with the Gefen EXT-CU-LAN Matrix Controller
Enhanced API for added functionality with third-party control systems
Built-in web interface, Telnet, and UDP
Compatible with the Gefen Keyboard Switching Controller software, available for download at www.gefen.com
Supports 39,900 Senders and a combination of over 65,000 Sender and Receiver units, depending on the network bandwidth and number of ports on your network switch
Two USB 2.0 ports with data rates up to 480 Mbps and backward-compatibility with USB 1.1
Two USB 1.1 ports with KM Emulation, for use with Human Interface Devices (H.I.D.)
802.3af standard Power-over-Ethernet allows the new Sender and Receiver units to be powered through a standard PoE-enabled IP network switch, without the need for external power supplies
Two-port Gigabit Ethernet switch built into the Receiver unit
Mode switch on Sender for sharpness or motion-optimization of image
Field-updatable firmware via EXT-CU-LAN controller or the built-in web server interface
Locking power supply connectors
Half-rack width Sender and Receiver enclosures are rack-mountable using EXT-RACK-1U-GRY
Sender and Receiver can also be surface-mounted using the included L-brackets
Low profile Receiver enclosure features an IR Extender port and can be hidden away behind the display
Specs:
Shipping Info
Length - 13.2 (Inches)
Width - 8.1 (Inches)
Height - 3.6 (Inches)
Weight - 3.4 (Lbs)
UPC888814999730
Other Specifications
Video Input connector (Sender) (1) HDMI Type A 19-pin, female, locking
Video Output connector (Sender) (1) HDMI Type A 19-pin, female, locking
Video Output connector (Receiver) (1) HDMI Type A 19-pin, female, locking
Line Input (Sender) (1) 3.5mm mini-stereo jack
Line Output (Sender) (1) 3.5mm mini-stereo jack
Mic Input (Receiver) (1) 3.5mm mini-stereo jack
Headphones/Line Output (Receiver) (1) 3.5mm mini-stereo jack
Optical Digital Audio Output (Receiver) (1) TOSLINK®
USB Host Interface port (Sender) (1) USB Type B, female
USB Device ports (Receiver) (2) USB 2.0 Type A, female
(2) USB 1.1 Type A, female
RS-232 port (Sender) (1) DB-9, female
RS-232 port (Receiver) (1) DB-9, male
IR Sensor (Receiver) (1) Located on front panel
IR In/Ext (Sender/Receiver) (1) 3.5mm mini-stereo jack
IR Out (Sender/Receiver) (1) 3.5mm mini-mono jack
IR Extender type EXT-RMT-EXTIRN
Ethernet port (Sender) (1) RJ-45, shielded, PoE
Ethernet ports (Receiver) (2) RJ-45, shielded, one with PoE
Channel Up/USB-Request button (Receiver) (1) tact-type
Channel Down button (Receiver) (1) tact-type
Mode button (Sender) (1) tact-type, recessed
Reset button (Sender/Receiver) (1) tact-type, recessed
Program button (Sender/Receiver) (1) tact-type, recessed
Program Select switch (Sender/Receiver) (1) slide-type, recessed
Link Indicator (Sender/Receiver) (1) LED, green
Power Indicator (Sender/Receiver) (1) LED, blue
Power Supply jack (Sender/Receiver) 5V DC, 2.5mm pin and 5.5mm barrel, locking
Power Requirement (Sender/Receiver) 5V DC, or PoE (802.3af standard)
Power Consumption Sender: TBD
Receiver: TBD
Operating Temperature (Sender/Receiver) +32 to +122°F (0 to +50°C)
Operating Humidity (Sender/Receiver) 5% to 90% RH, non-condensing
Storage Temperature (Sender/Receiver) -4 to +185°F (-20 to +85°C)
Storage Humidity (Sender/Receiver) 0% to 95% RH, non-condensing
MTBFSender: 50000 hours
Receiver: 50000 hours
Dimensions (W x H x D, without connectors or feet)Sender 8.4" x 1.7" x 5.9" (214mm x 43mm x 150mm)
Receiver 8.4" x 1.0" x 5.9" (214mm x 25mm x 150mm)
Unit Weight Sender: TBD
Receiver: TBDShipping Weight Sender: TBD
Receiver: TBD
* Features and specifications are subject to change without notice.
** Pending features to be activated via an upcoming firmware update
All trademarks and registered trademarks are properties of their respective owners.
Copyright© 2018 Core Brands, LLC.
In The Box
Receiver unit (EXT-UHDKA-LANS-RX)1
5V 4A Power Supply (EXT-PS54AULPN-6)1
AC Power Cord (CAB-POWERCORD-xx)1
Self-Adhesive Rubber Feet4
L-Shaped Mounting Brackets2
Machine screws for L-Shaped Mounting Brackets4
Machine screws for EXT-RACK-1U-GRY (sold separately)2
Quick-Start Guide1