Honda 72-74 CB450 72-74 CL450 Air Filter Set Left and Right - Reproduction

Description

Honda 72-74 CB450 72-74 CL450 Air Filter Set Left and Right - Reproduction
Honda 72-74 CB450 72-74 CL450 Air Filter Set Left and Right - Reproduction
Honda 72-74 CB450 72-74 CL450 Air Filter Set Left and Right - Reproduction
See installation steps below.
The 1971 and earlier CB450 and CL450 used a different style of plastic filter housing. These filters fit the original housing on the models shown below.
Original filters for the 450's have become quite scarce. Scrambler Cycle had these filters manufactured to help out those that still want to run original style filters on your 450.
Part # = 17211-346-671
Part Description = ELEMENT, R. A/CLNR - (replaces 17211-346-670)
Model Count = 5
CB450-K5 1972 450 Super Sport 450 Street
CB450-K6 1973 450 Super Sport 450 Street
CB450-K7 1974 450 Super Sport 450 Street
CL450-K5 1972 450 Scrambler 450 Dual Sport
CL450-K6 1974 450 Scrambler 450 Dual Sport
Part # = 17311-346-671
Part Description = ELEMENT, L. AIR CLEANER
Model Count = 5
CB450-K5 1972 450 Super Sport 450 Street
CB450-K6 1973 450 Super Sport 450 Street
CB450-K7 1974 450 Super Sport 450 Street
CL450-K5 1972 450 Scrambler 450 Dual Sport
CL450-K6 1974 450 Scrambler 450 Dual Sport
Installation -
1. It is usually best to install the original plastic cover over the filter first. Be sure to try and fit the flange into the groove on the plastic cover. Over the years these plastic covers can become a bit distorted depending on how carefully they were installed. You may have to make some slight bends to the filter flange and/or the plastic cover.
2. Place carb clamp onto intake rubber. (carb clamp not included )
3. Install filter onto carb starting with rubber intake.
4. Slide filter into place and make sure rear crossover flange is seated in the filter crossover. (make sure the rubber gasket is still on the lip of the tube, this gasket is not included) It might help to use grease or soap to make the fit easier.
5. Install the bolt for the top forward mount but do not tighten.
6. Insert the bolt through center of filter cover and filter. You may have to twist filter and housing slightly to align bolt with threaded hole.
7. Tighten bolt but be sure you are not cross-threaded!
8. Tighten bolt on upper forward mount.
9. Tighten clamps on rubber boots to carbs.
Shipping
Returns
About Us
More than happy to combine shipping with other items. Items usually ship out within 1 day after payment.
International Customers - Any taxes or customs fees are the responsibility of the buyer.
Items in new / unused condition and still in original packaging may be returned for a refund.
Scrambler Cycle is a small motorcycle shop specializing in vintage motorcycle repair and part sales. If you ever find yourself in northwest Wisconsin feel free to stop in.